Introducing the
FDA Cleared · 755 / 808 / 1064 nm · All Fitzpatrick types
FDA cleared for hair removal on these wavelengths.
HR-LASE™ Tri-Wavelength Diode Laser
Safe, effective, and affordable, the HR-LASE™ is a modern approach on the traditional diode that is easier, faster, and suitable for the broadest range of wavelengths for all skin types and treatments.
FDA Cleared · 755 / 808 / 1064 nm
The same clinical results. Factory direct.
Candela and Lumenis make good equipment. HR-LASE™ is the same hardware class — factory-direct, no rebrand. The difference is who's between you and the factory — with Alderm Direct, nobody.
FDA Cleared · 755 / 808 / 1064 nm
No reps. No distributor. Just the equipment.
Alderm Direct buys factory-direct and ships to your practice. No rebadging. No intermediaries between the factory and your room. Four steps from first call to treating patients.
Why the HR-LASE™?
Made for Experts, by Experts.
With over 40 years of experience using, designing, and selling lasers, the team at Alderm Direct decided it was time to make a product we knew the market needed — because we’ve tried everything else, too.
Versatility
FDA clearance on all three wavelengths for safe use on Fitzpatrick I–VI and small or large areas. Safely.
See the spec sheet →Speed
A laser with a high (10 Hz) frequency allows you to speed through sessions. Confidently.
See session times →Service
National service organization with 24-48 hour loaner shipping. We keep your treatment rooms running.
Talk to the team →Marketing
We partner with Pedal Performance and offer an exclusive 90-day kickoff program that will generate up to 25 leads / month to expand your hair removal business.
Talk to the team →FAQs
More about the HR-LASE™
-
What makes the HR-LASE™ easier to use than other systems? How is it different from other brands?
Three differences, in order: it runs on three FDA-cleared wavelengths (755 / 808 / 1064 nm) where most diode systems run on one, so a single device covers the full Fitzpatrick range safely. The handpiece runs at 10 Hz, meaning a continuous fluid pass rather than a single-shot-at-a-time treatment rhythm. The unit is roughly 50 lbs, ships with a wheeled treatment table, and fits a standard clinic room without a dedicated laser bay.
Call us — we’ll walk through how it compares to whatever you’re currently considering.
-
How does it deliver more, faster sessions?
The HR-LASE™ features a 12 × 16 mm spot and fires at 10 Hz — ten pulses per second — so treatment flows as a continuous pass rather than a one-shot rhythm. A full back finishes in about 20 minutes; both legs in 30; facial hair in 10.
Efficient spot size, rapid firing, full coverage on every body area. Call us to discuss how this fits your practice.
-
How does the multi-wavelength design handle different hair types and skin tones?
The three wavelengths address three absorption profiles: 755 nm (Alexandrite-range) for finer, lighter pigment; 808 nm (the diode workhorse, FDA cleared for hair removal) for the broad middle range; and 1064 nm (Nd:YAG), which penetrates deeper and treats darker Fitzpatrick types safely where single-wavelength 808 nm systems can’t.
The clinical effect: one machine for the full range of patients walking through the door. Talk to the Alderm Direct team to think through your patient mix.
-
How do I make sure I see enough patients to justify the purchase?
This is the right question to ask, and it’s one we take seriously before any sale. Every HR-LASE™ purchase includes a 90-day launch marketing package through our partners at Pedal Performance — a dedicated lead-gen microsite and funded ad spend designed to start booking hair-removal patients before the unit's been in your room a month. From there, you can continue with Pedal's exclusive ongoing program, built to generate 20–25 new leads per month as you scale.
The marketing is only half of it: you need a staff member who can convert incoming leads into booked appointments. We’ll talk through your team setup on the call to make sure you’re positioned to succeed.
-
How much does the HR-LASE™ cost?
We don’t publish pricing on the site — purchase variables (single unit vs. group, financing structure, lead time, accessories) move the number enough that a listed figure would mislead more than it helps. Financing through established third-party programs is on the table for qualified buyers, and we’ll size it to your practice setup on the call.
Call us and we’ll walk through everything in one conversation.
-
Do you offer custom pricing for purchasing multiple units?
Yes. Multi-location practices, dermatology and plastic-surgery groups, and PE-backed aesthetic platforms are handled differently from single-unit orders — the structure typically combines a unit-count discount with financing through our partner network. Specifics live on the phone, not on the site.
Talk to the Alderm Direct team and we’ll size a package to your unit count.
-
Is the HR-LASE™ FDA cleared?
Yes. The HR-LASE™ is FDA cleared for hair removal on 755 nm, 808 nm, and 1064 nm — all three wavelengths it operates on.
Documentation is available on request — call us if you need the paperwork before your purchasing decision.
-
What skin types can it treat?
All Fitzpatrick types, I through VI. The tri-wavelength design is the reason — 1064 nm specifically treats darker skin tones that single-wavelength 808 nm systems can’t handle safely.
Talk to the Alderm Direct team to discuss your patient population.
-
How fast is a typical treatment session?
Faster than conventional diode systems. A full back is roughly 20 minutes; both legs run 30 minutes; facial hair in 10 minutes. The 10 Hz firing rate is what drives the throughput.
Call us to map that to your schedule and revenue plan.
Next step
Talk to the Alderm Direct team directly.
Alderm Direct is led by founder Jim Kraushaar — 40+ years in aesthetic technology. The team handles every conversation directly — no sales floor, no runaround. 30 minutes to talk through the unit and decide if the math works for your practice.